Home › Guides › How to reset a refrigerator water filter light
How to reset a refrigerator water filter light
After you install a new refrigerator water filter, the filter light on the door usually stays on until you reset it. The reset is brand-specific — here is how to clear it on the most common fridges.
How to reset the filter light
- Install the new filter fully until it locks or clicks into place.
- Run 1–2 gallons of water through the dispenser to flush carbon fines (water may look cloudy at first).
- Use the brand-specific reset below until the indicator turns green or turns off.
- If the light returns within days, reseat the filter and confirm you used the correct part number.
Samsung
Press and hold Ice Type (or Filter Reset) for about 3 seconds until the light resets. On some Family Hub models, open Settings → Fridge Manager → Water Filter → Reset.
Common Samsung parts: HAF-CIN / DA29-00020B, HAF-QIN.
LG
Press and hold Water Filter Reset (often on the dispenser panel) for 3–5 seconds. Some French-door models use Ice Plus + Light together.
See LG LT1000P vs older LT700P.
GE & Café
Press and hold Reset Filter (or Water Filter) for 3 seconds. On older models, the button may sit behind the grille or next to the dispenser.
Popular GE filters: RPWFE, XWFE. Compare them in GE RPWFE vs XWFE.
Whirlpool, KitchenAid, Maytag (EveryDrop)
Press and hold Filter Reset (sometimes labeled Water Filter) for 3 seconds. On some models you press Lock + Measured Fill together.
Common EveryDrop codes: EDR1RXD1, EDR4RXD1. Full series overview: Whirlpool EveryDrop filter guide.
If the light will not reset
- Confirm the filter is seated (half-turn or push-to-lock, depending on design).
- You may have the wrong part for the fridge — match by model or old filter code on Filter Searcher.
- Power-cycle the fridge (unplug 60 seconds) and try the reset again.
- Check the manual for a model-specific sequence; manufacturers occasionally change button names.
FAQ
How often should I replace the filter before resetting?
Most brands recommend every 6 months or about 200 gallons. See how often to replace a fridge water filter.
Does resetting without replacing the filter hurt anything?
It only clears the reminder. Filtration still declines if the media is spent, so reset after installing a new filter.
Why is my water cloudy after a new filter?
Air and carbon dust are normal for the first few gallons. Flush until the water runs clear.
Next step: Find your exact filter and stock a spare →